Merry Christmas everyone!

Last Saturday my church hosted a Children's Christmas party. It was a lot of fun, with crafts, gifts, and also Koko the clown, who entertained the guests with magic tricks, juggling, balloons, and shared about the meaning of Christmas. At the end, we also gave each kid a balloon animal, with which I helped out.

Because we were expecting possibly 100 kids, I tried to think of simpler balloon animals. We gave out red flowers, camels (which the wise men rode), and sheep (who were present in the stable where baby Jesus slept.) I was out of green 260 balloons, so I cut the red (for the petals) and green (for the stem) 160 balloons into halves to make two smaller flowers.

Camel: The camel balloon was a pretty simple animal to make. I went with a one-balloon design based on this camel youtube video. I simplified the design a bit - I didn't do the tulip twist, and because I wanted the knot to be at the tail and not on the head, I started by making the tail first (instead of the head.) You'll want to leave a little bit less than a 4 inch tail when inflating the balloon. I like to use up the entire balloon, and it may take you a try or two to get the size of the legs and body of the camel just right so that you have just the right amount left for the neck and head. After you are done twisting, bend the neck of the camel upwards, and bend the head downwards.

Sheep:  The sheep is a little more complex than the camel, as it uses two balloons and requires more knot tying. I followed these instructions from Professor Wonder to make this balloon. I also simplified this balloon in that I didn't use the tulip (apple) twist to attach the two balloons. Instead I just tied the ends together. (I'm not too good with the tulip twist and often end up popping the balloon.) In addition to white sheep, I also made a few that were blue, pink or purple, and used either black and blush for the head. (The kids preferred blush over black.) I try to use up the entire balloon here as well, so I don't have do any additional cutting or tying.

Professor Wonder also has a two-balloon camel design, as well as other characters from the nativity scene.

After you finish making the camel and/or sheep, you can use a Sharpie or dry erase marker to draw the eyes and mouth.

[ One-balloon camel video by Charles ]
[ Sheep instructions and other nativity characters by Professor Wonder ]

Fish balloon - one of the favorites!

This fish balloon is always one of the favorites. It's actually not too complicated to make - it's the combination of color and shapes that makes this fish really cool.

Video instructions: How to make a balloon fish

This fish uses five balloons - two 260s, one large round balloon for the body, and two small ones for the eyes. (If you don't have small round ones, you can use a 260 to make the eyes with a couple loops twists.) Choose colors that will go well together.

You'll basically make two pinch twists (which might be the most difficult part) for the lips and two loop twists for the fins.

After making the balloon, I like to give a kid the chance to draw in the eyeballs/eyelashes, which they always enjoy.

[ Video link : How to make a balloon fish ]

I want a hippopotamus for Christmas...

This cute hippo design uses one 260 balloon and one pink heart balloon. I used a gray 260 balloon, but a silver, brown, or even light purple, light green, or light blue one would work well. This is another neat way to use a heart balloon. (I've seen a heart balloon used similarly in a cow balloon design as well.)

To make the balloon, follow these hippo balloon instructions by Bonnie Davis.

My comments: When inflating the balloon, you'll want to leave about a 5 inch tail. (If you leave less of a tail, you'll run of space for the balloon to expand.) Near the end, if you find that you've run out of balloon or don't have room to make any additional twists, you can settle for only using four belly balloons (instead of five). Just deflate the remaining bubble that you don't need, tie a knot, cut off part of the end if it's too long, and wrap the knot around the body to hide it. Your hippo body will only be made of four bubbles and won't be as big, but will still look pretty good.

 

[ Hippo balloon instructions by Bonnie Davis ]

Froggies! (and snake)

I’ve seen some different frog designs, and here’s a pretty simple one that I like. It uses a green 260 balloon for the frog body, and a bit of yellow or white (you can use a leftover scrap) for the eyes.

See the video here. (The person in the video has also made many other videos which are available from the same site, and are worth a look.)

Comments on the video instructions: You will want to leave about a 4.5 inch tail when blowing up the green balloon. I quickly ran out of “balloon” and had to make sure not to make any bubbles too large. If you do find that you’ve run out of balloon, you can just make the two legs from a second green balloon and then attach them.

To make a simple snake: just make the head of the frog. When blowing up the balloon, leave a smaller tail (around 1.5 inches), as you won't be making as many twists. After making the head, bend the rest of the balloon into a zig-zag shape. Push the air into the uninflated part of the balloon. I also attached an uninflated piece of leftover red balloon for the snake tongue.

[ Video instructions by Dale Obrochta ]

Helicopter

Little kids (especially boys) seem to love trains, trucks, and other vehicles. So, when I came across instructions for this helicopter balloon, I was eager to try it out. This balloon takes two balloons - preferably one 160 (for the rotors) and one 260 (for the helicopter body.) If you only have 260s, two 260s will work just fine.

See the directions from Professor Wonder here.

 

My comments on the instructions: You will use up the entire balloon for the helicopter body. I found that I quickly ran out of "balloon" and I had to make a lot of the bubbles smaller than what the instructions called for. (For example, the 6 inch bubbles were more like 3.5-4 inch bubbles for me.)
When making the rotors, I inflated the balloon till there was 1-1.5 inches left, not the 3 indicated in the instructions. I wanted to use up as much as I could of the balloon for the rotors.

To take the pictures, I attached a piece of string to the rotors and hung up the helicopter. A helicopter belongs in the air anyway. :) For a kid's birthday party, if it fit your theme, I imagine you could hang the helicopters (and perhaps some airplanes?) around the room as decorations for a nice touch.

[ Instructions from Professor Wonder ]

Hello Kitty

I made these Hello Kitty balloons for a friend’s birthday. (Happy Birthday A!) I’m glad Hello Kitty is still in!

To make this balloon:

I followed this youtube video. Note that the girl teaching how to twist the balloon is an eleven year old!

Modifications: Instead of using all 260 balloons, I used a red 160 for the hair bow, a red 350 for the body, and a white 260 for the arms and legs, so that everything would be in more accurate proportions. (A 160 is one inch in diameter, a 260 is two inches in diameter, and a 350 is three inches in diameter. This was the first time I used a 350 balloon ever, so that was pretty exciting.) You can of course use other colors for the hair bow and body. The head is made from a 5” heart balloon.

I looked up some pictures of Hello Kitty online (sanrio.com) and used that to draw the face. I tried to keep the body relatively short (Hello Kitty’s head is bigger than the rest of her body!)

To attach the hair bow to the head, you will use what is called a raisin twist, which is a pretty cute and clever technique. You basically insert a small knotted piece of (uninflated) balloon into the balloon (the head) that you want to attach the other balloon (the hair bow) and grab that knot from the outside to attach the hair bow.

[ Hello Kitty video instructions: Youtube video ]

Somewhat related (but not balloon-related): Hello Kitty Rice Crispy Treats

Birdies for the last SS class of the year

Yesterday was my last SS class with the 4-5 year olds - they'll be moving on to the Kindergarten class next week! They have grown so much! I made the birds above as a little gift.

Last Day of SS
We didn't have a formal lesson, so I made up some different activities. After a review game, I talked about God's creation and showed some pictures I had taken recently of some plants and insects, as well as pictures of my family (they happened to be in the same pile and the kids were interested,) and ended with a picture of the class.

Afterward, I brought out the balloons and made a couple simple animals, which the kids enjoyed. (Some of the kids started repeating "I want a ...." so I put the balloons away. My funny assistant replied "I want a hamburger" making the kids laugh.) I asked if they thought these animals I just made were special, and they said yes, as expected. Then, I reminded them that God created each of them and they were all super special!

Making the birds
You'll need one 160 and one 260. I followed the directions by Twistina. (Really nice instructions and photos!) It took longer than I expected. Adding detail, such as the legs and beak, adds more time, but they sure do look really nice and colorful. It ended up taking me about 15 minutes a bird after I got the hang of it (and some popped balloons.) I was excited to use my 160s for the first time.

I simplified the design of some of the birds: I didn't add the pinch twist at the tail for some. Also, if I had just the right amount of air left after forming the head, I didn't break off the last bit of the balloon. I would hide that last air bubble inside the body, or make it into a little chin under the beak, which also looks pretty cool.

To make the eyes: I drew eyes with regular markers on the leftover white part of a sticker sheet and then cut them out. I added a little color to some of the eyes (although you probably can't see it in the picture.) You can draw the eyes directly onto the balloon with a Sharpie, but I liked the look of having the white part of the eyes. You can also add eyebrows or eyelashes.

I made all the birds the day before, as I knew I wouldn't have time to make them all during class (about 12-15 kids). 

The birdies here are all packed up and ready to go, and they each survived the trip just fine.

[ Directions by Twistina on balloonhq.com ]